3 Layer HHR Blown Film Line
3 Layer HHR Blown Film Line
The most important data at a glance
| Polymer | LL / LDPE /HM/HDPE/ EVA / metallocene |
| Thickness Range | 20 – 200 µ |
| Layflat Range | 1200 – 2100 mm |
| Output | 240 – 310 Kg/Hr |
General Purpose Film
Surface Protection Film
Tarpaulin Film
Lamination Film
Shrink Hood Film
FIBC Liner/Mattress Cover
Food Packaging Film
LD-Shrink Film
Milk Film
Strech Film
Courier Bag
Water Packaging Film
Atta Film
Mulch Film
Agroshed Net Film
3 Layer HHR Blown Film Line
Perfect for you because
Simple in Design
Easy in Operation
Compact & Efficient
Advantages :
-
Minimum Gauge Variation Even At Higher Output With High Gloss Film.
-
Produce Thinner & Thicker Film From Same Blown Film Plant With Optimum Output.
-
Better Homogeneous Mixing And Melting Of Polymers.
-
Easy To Operate At Different Layflat Size & Very Good Bubble Control.
-
Avoid Degradation Of Melt & Get Best Optical Property Of Film In Long Run.
-
To Avoid Degradation Of Melt & Get Best Optical Property Of Film In Long Run.
-
Hasle Free Operation Of Extruder.
Product Video :
3 Layer HHR Blown Film Line
Technical Specification
|
Model Name : OBC Type High Performance Three Layer Blown Film Plant |
|
Material Used : LL / LDPE /HM/HDPE/ EVA / metallocene |
|
Output Range : 240 - 310 Kg/Hr (Depends On Extruder’s Size) |
|
Screw Diameter : 55 / 65 / 75 mm (Customized) |
|
Screw L/D : 30:1 |
|
Layflat Range: 1200 - 2100 mm |
|
Thickness Range : 20 – 200 µ |
3 Layer HHR Blown Film Line
Select Your Model (Can select more than one model)
SE3HR 1700-55/65/55
- Screw Diameter: 55 / 65 / 55 mm
- Layflat Range: 1200-1600 mm
- Max. Output: 240-250 Kg/Hr
- Thickness Range: 20-200 µ
SE3HR 1800-55/65/55
- Screw Diameter: 55 / 65 / 55 mm
- Layflat Range: 900-1700 mm
- Max. Output: 260-270 Kg/Hr
- Thickness Range: 20-200 µ
SE3HR 1900-55/65/55
- Screw Diameter: 55 / 65 / 55 mm
- Layflat Range: 1000-1800 mm
- Max. Output: 260-270 Kg/Hr
- Thickness Range: 20-200 µ
SE3HR 2200-55/75/55
- Screw Diameter: 55 / 75 / 55 mm
- Layflat Range: 1500-2100 mm
- Max. Output: 280 – 330 Kg/Hr
- Thickness Range: 20-200 µ
SE3HR 1900-55/75/55
- Screw Diameter: 55 / 75 / 55 mm
- Layflat Range: 1000-1800 mm
- Max. Output: 280 – 310 Kg/Hr
- Thickness Range: 20-200 µ
WE WILL GLADLY ADVISE YOU PERSONALLY
Looking for the right solution? We would be happy to advise you on which solutions best suit your needs. We are happy to help you make the right decision based on your individual requirements.
Mo. : +91 6357770050
E-mail : marcom@shubhamextrusion.com
Click here for personal advice