β Flex 5 Layer Co-Extrusion Blown Film Line

Co-Extrusion

Machine Specifications

  • Polymer: LDPE, LLDPE, Tie, Virgin Raw Material
  • Micron Range: 20 To 200
  • Lay Flat Range: 1800mm – 2500mm
  • Output: 450 – 600 Kg/Hr (Depends On Extruder’s Size)

Applications

Select Your Model

SE5HR 2300 POD Five Layer

  • Screw Diameter : 55 / 65 / 75 / 65 / 55 MM
  • Layflat Width : 1450-2200 mm
  • Max. Output : 500 kg/hr
  • Thickness : 20-200 mm

SE5HR 2600 POD Five Layer

  • Screw Diameter : 65 / 75 / 90 / 75 / 65 MM
  • Layflat Width : 1750-2500 mm
  • Max. Output : 600 kg/hr
  • Thickness : 20-200 mm

Give us some more information

Q1.Materials (Can select more than one model)

HDPE

LDPE

LLDPE

BIO

Others

Q2.Film width

Minimum

mm (

inch )

Maximum

mm (

inch )

Q3.Thickness

Minimum

micron (

mm )

Maximum

micron (

mm )

Q4. End Product

T-shirt bags / Shopping bags

Bottom sealing bags

Industrial bags

Garbage bags

Table Covers / Sofra rolls (Sufra rolls)

Mattress

Shrink films

Bag on rolls

Flat film rolls

Others

Installation Photos

Specification

Model Name :

BETAFLEX 5 Layer Co-Extrusion Blown Film Line

Final Product :

LL / LLDPE

Material Used :

LDPE, LLDPE, Tie, Virgin Raw Material

Output Range :

450 - 600 Kg/Hr (Depends On Extruder's Size)

Film Layer :

Five Layer (Internal Bubble Cooling System)

Screw Diameter :

55 / 65 / 75 / 90 MM

Screw L/D :

30:1

Layflat Width :

1800 - 2500 MM

Micron Thickness :

20 - 200

POD Concept

Non barrier five layers film comes from a strong market demand for sustainable specialty films with reduced thickness, good sealing and optical properties. The five-layer technology for Polyolefin Dedicated Film (POD) enables production economies and quality enhancement. Polyolefins are a family of polymers produced from a simple olefin (also called an alkene) as a monomer. The two most common classes are PolyEthylene (PE) and PolyPropylene (PP). Polyolefins are used in a wide range of Medical Applications including Dilators, Introducers, Packaging, Film and Molded Components. They generally offer good Biocompatibility, Chemical Resistance and Lubricity while offering acceptable tensile and impact properties. However, care needs to be taken when evaluating the sterilization of the materials as they have limited temperature and radiation resistance.

Extruder

Non barrier five layers film comes from a strong market demand for sustainable specialty films with reduced thickness, good sealing and optical properties. The five-layer technology for Polyolefin Dedicated Film (POD) enables production economies and quality enhancement. Polyolefins are a family of polymers produced from a simple olefin (also called an alkene) as a monomer. The two most common classes are PolyEthylene (PE) and PolyPropylene (PP). Polyolefins are used in a wide range of Medical Applications including Dilators, Introducers, Packaging, Film and Molded Components. They generally offer good Biocompatibility, Chemical Resistance and Lubricity while offering acceptable tensile and impact properties. However, care needs to be taken when evaluating the sterilization of the materials as they have limited temperature and radiation resistance.

  • The Lowest Wetted Surface Area compared to all dies in industry
  • Shortest Flow Grooves
  • No restriction on # of spirals
  • 30% to 50% less melt volume
  • Individual internal heat zones
  • Only 10 parts for Five Layer
  • Much faster heating & cooling
  • Easy to assemble & disassemble