Three Layer Non-IBC Co-extrusion Blown Film Lines

Extrusion

Three layer non-ibc co-extrusion blown film line with horizontal oscillating haul-off

Machine Specifications

  • Polymer : LL / LDPE /HM/HDPE/ EVA / METALOCENE
  • Thickness Range : 20 To 200 Micron
  • Lay Flat Range : 1200mm – 2100mm
  • Output : 240 – 310 Kg/Hr

Applications

Select Your Model

OBC SE3HR 1700-55/65/55

  • Screw Diameter : 55 / 65 / 55 mm
  • Layflat Width : 1200-1600 mm
  • Max. Output : 240-250 kg/hr
  • Thickness Range : 20-200 Micron

OBC SE3HR 1800-55/65/55

  • Screw Diameter : 55 / 65 / 55 mm
  • Layflat Width : 900-1700 mm
  • Max. Output : 260-270 kg/hr
  • Thickness Range : 20-200 Micron

OBC SE3HR 1900-55/65/55

  • Screw Diameter : 55 / 65 / 55 mm
  • Layflat Width : 1000-1800 mm
  • Max. Output : 260-270 kg/hr
  • Thickness Range : 20-200 Micron

OBC SE3HR 2200-55/75/55

  • Screw Diameter : 55 / 75 / 55 mm
  • Layflat Width : 1500-2100 mm
  • Max. Output : 300 – 310 kg/hr
  • Thickness Range : 20-200 Micron

Give us some more information

Q1.Materials (Can select more than one model)

HDPE

LDPE

LLDPE

BIO

Others

Q2.Film width

Minimum

mm (

inch )

Maximum

mm (

inch )

Q3.Thickness

Minimum

micron (

mm )

Maximum

micron (

mm )

Q4. End Product

T-shirt bags / Shopping bags

Bottom sealing bags

Industrial bags

Garbage bags

Table Covers / Sofra rolls (Sufra rolls)

Mattress

Shrink films

Bag on rolls

Flat film rolls

Others

Installation Photos

Specification

Model Name :

OBC Type High Performance Three Layer Blown Film Plant

Material Used :

LL / LDPE /HM/HDPE/ EVA / METALOCENE

Output Range :

240 - 310 Kg/Hr (Depends On Extruder’s Size)

Screw Diameter :

55 / 65 / 75 MM (Customized)

Screw L/D :

30:1 (Customized)

Layflat Width :

1200 - 2100 MM

Thickness Range :

20 – 200 Micron

Optional Devices :

Hopper Loader, Air Chiller, Corona Treater, Bi-Metallic Screw & Barrel Set, Water Chiller, Heat Exchanger, Fully Automatic Winder, Hydraulic Unloading, Gravimetric Dosing System, Main Panel Air Condition

Sailent Features & Advantages

  • Comptiable with industry 4.0
  • Taper lock die head mechanism gives unifrom gap layer to layer to have minimum gauge variation even at higher output with high gloss film.
  • Plazma nitrided barieer screw with 72-74 hrc hardness for longer life
  • Die head manufactured & assembled from japanese steel pre-hardened & stress relieved to avoid degradation of melt & get best optical property of film in long run
  • Gear box technology with force oil cooling and plate type heat exchanger for hasle free operation of extruder
  • Scissor type calibration cage with motorized open/closed & up/down for easy to operate at different layflat size & very good bubble control
  • All melt flow surface polished to finish of 6-8 rms & plated to avoid degradation of melt & get best optical property of film in long run
  • Heavy duty horizontal bottom supported haul off unit gives less width variation and better gauge randomisation