Betaflex 5 Layer -polyolefin Dedicated Line

Co-Extrusion

Machine Specifications

  • Polymer : LDPE, LLDPE, Tie, Virgin Raw Material
  • Thickness Range : 20 To 200 Micron
  • Lay Flat Range : 1800mm – 2700mm
  • Output : 500 – 625 Kg/Hr (Depends On Extruder’s Size)

Applications

Select Your Model

SE5HR 2300 POD FIVE LAYER

  • Screw Diameter : 55 / 65 / 75 / 65 / 55 MM
  • Layflat Width : 1450-2200 mm
  • Max. Output : 500-525 kg/hr
  • Thickness Range: 20-200 Micron

SE5HR 2600 POD FIVE LAYER

  • Screw Diameter : 65 / 75 / 90 / 75 / 65 MM
  • Layflat Width : 1800-2500 mm
  • Max. Output : 575-600 kg/hr
  • Thickness Range: 20-200 Micron

SE5HR 2800 POD FIVE LAYER

  • Screw Diameter : 65 / 75 / 90 / 75 / 65 MM
  • Layflat Width : 2000-2700 mm
  • Max. Output : 600-625 kg/hr
  • Thickness Range: 20-200 Micron

Give us some more information

Q1.Materials (Can select more than one model)

HDPE

LDPE

LLDPE

BIO

Others

Q2.Film width

Minimum

mm (

inch )

Maximum

mm (

inch )

Q3.Thickness

Minimum

micron (

mm )

Maximum

micron (

mm )

Q4. End Product

T-shirt bags / Shopping bags

Bottom sealing bags

Industrial bags

Garbage bags

Table Covers / Sofra rolls (Sufra rolls)

Mattress

Shrink films

Bag on rolls

Flat film rolls

Others

Installation Photos

Specification

Model Name :

BETAFLEX 5 Layer Co-Extrusion Blown Film Line

Material Used :

LDPE, LLDPE, Tie, Virgin Raw Material

Output Range :

500 - 625 Kg/Hr (Depends On Extruder's Size)

Film Layer :

Five Layer (Internal Bubble Cooling System)

Screw Diameter :

55 / 65 / 75 / 90 MM

Screw L/D :

30:1

Layflat Width :

1800 - 2700 MM

Thickness Range :

20 – 200 Micron

Features

  • Layflat Range 1450-2500 mm with Maximum Output 600 kg/hr
  • Stack Conical Die Head Mechanism provide uniform gap Layer to Layer
  • Film Thickness Range 20-200 microns
  • Grooved Feed Barrier Screw with L/D Ratio 30:1
  • Scissor type Calibration Cage with Motorized Open/Closed & Up/Down
  • All Melt Flow Surface Polished to Finish of 6-8 RMS & Plated
  • IBC Die Head Fabricated from Canadian Design AISI 4340 Pre-Hardened & Stress Relieved
  • Fully Automatic Winder with PLC & Touch Screen
  • Internal Bubble Cooling (IBC) System
  • Thickness Measuring Device

Advantages

  • Produce different range of Film from our wide range of IBC Blown Film Plant
  • Minimum Gauge Variation even at Higher Output
  • Produce Thinner & Thicker Film from same Blown Film Plant with Optimum Output
  • Better Homogeneous Mixing and Melting of Polymers
  • Easy to operate at different Layflat Size & very good Bubble Control
  • Avoid Degradation of melt & get best Optical Property of Film in Long Run
  • Uniform Grain Structure which prevent warping of Die Parts during Heating & Cooling
  • It can handle bigger diameter of roll up to 1000 mm, Easy Change Over Due to Auto Splice
  • Increased Output by 30-40% compare to Non IBC Blown Film Plant
  • To Measure and Control the Layflat Width on Blown Film Lines